How to make a round full-color LED display? Application products have begun to be used more and more widely, and product design schemes have become more mature. There are more solutions for users to choose from to meet different use occasions. Structural requirements.

　　 In fact, it is very simple to sum up. There are only two design options for everyone to choose from. The difference is the appearance and structure design. This has nothing to do with the screen itself.

　　 Let’s take a look at the actual application products of the two round full-color LED displays, and briefly introduce some of the differences between them.

　　 The indoor P3 full-color LED circular display with a diameter of 1.5m in the picture above has an obvious frame. Generally, for small-diameter, round full-color LED displays that can be viewed at close range, the frame diameter should be as small as possible, so that it is more beautiful.

　　 This outdoor large-diameter advertising LED circular screen also has a frame, and the thickness of the frame is relatively large, almost tens of centimeters. If it does not affect the aesthetics of the overall project, the average user can still accept it.

　　 The frame size of this round screen product is very small. If you look at it from a distance, it can almost be ignored, only a thickness of 1 cm. Not only this small-diameter logo display product, but many applications have strict requirements on the size of the round screen frame.

　　 So whether the round LED display is indoor or outdoor, the product solutions of the two processes are:

　　1, round full-color LED display without frame (in fact, the frame size is less than 2cm); 2. Round full-color LED display with frame (larger frame size).

　　 The first product solution requires redrawing the PCB according to the requirements of the circular screen model and size, and even requires mold opening. The dot pitch and diameter size change at any one, and it is necessary to reopen the mold. Therefore, the product cost of this process will be higher, and the production cycle will be relatively longer.

　　The product of the second product solution does not need to re-open the mold design. It uses the conventional full-color LED display unit board product to achieve the circular display effect through the processing of the box structure and the setting of the control screen software. The simple understanding is that the circular screen is wrapped by the edge, and the geometric angle is not considered to be a circular shape at all.

There are probably so many introductions about round full-color LED display products. The following is a cost-effective indoor P3 round full-color LED display product. It belongs to the application of the second product solution, with a diameter of 800mm. , The frame is 45mm, the shape is actually quite beautiful, friends who are interested can leave a message to consult the product details.