LED factory lights can be divided into general lighting and partial lighting according to their lighting functions.
General lighting lamps are generally evenly arranged on the top or side walls of the work site to illuminate the entire work surface. It is necessary to use high-power incandescent lamps, tungsten halogen lamps, high-intensity gas discharge lamps or a large number of fluorescent lamps. The vast majority of industrial and mining lamps belong to this category. General lighting lamps have a higher demand for light dispersion, and two types of light dispersion, direct lighting and semi-direct lighting, are widely used, especially the latter. In the semi-direct lighting type, a part of the upwardly announced light illuminates the ceiling, which can add the ceiling brightness to create a more comfortable and brighter environment.
Part of the lighting is a kind of lighting that improves the illuminance of a certain working part. Its effect can be to strengthen and supplement the lighting on the basis of general lighting, and it can also be used as temporary lighting in places where lighting is not usually required (such as equipment maintenance and maintenance places). There are mostly no strict rules for their light distribution. Some lighting lamps are generally installed near the work area, using incandescent lamps and tungsten halogen lamps with safe extra-low voltage (≤50V, communication effective value) as the light source. There are (hand-held) running lights, hanging lights, work desk lights, machine tool work lights, etc. In some huge workshops, sometimes floodlights are used for partial lighting.
Factory lights can be divided into traditional light source factory lights (such as sodium lamp factory lights, mercury lamp factory lights, etc.) and LED factory lights according to the light source. Compared with traditional LED factory lights, it has great advantages:
1. LED factory lamp display index high RA>70
2. LED factory lights are more efficient and more energy-saving. The 100W LED high bay light can replace the traditional 250W traditional high bay light.
3. Traditional light sources all have the defect of high lamp temperature, and the lamp temperature can reach 200-300 degrees. The LED itself is a cold light source, and the temperature of the lamp is lower, making it safer.
4. In the continuous innovation of LED factory lights, the latest fin-type radiator factory lights have more reasonable radiator planning, which greatly reduces the weight of factory lights, and reduces the overall weight of 80WLED factory lights to below 4KG, which can be complete Solve the problem of heat dissipation of 80-300WLED factory lights.