Impact resistance, strong shock resistance, no filament and glass shell, no problem of traditional lamp breaking.

　　 The appearance of the LED lamp cap is light and light, which can effectively reduce the wind resistance, reduce the load of the lamp pole, and enhance the safety factor.

　　Intelligent control, constant current drive, brightening lighting LED lamp head power can be intelligently adjusted according to needs. The combination of single-chip microcomputer and traditional power converter can complete the intelligent control of high-power LED light source: light control + time control + active power conditioning.

　　The operating temperature is low, and the LED light source is classified as a cold light source. When the heat dissipation is good, the operating temperature is lower than 60℃, which will not cause the lampshade to age and yellow.

　　No flicker, the LED lamp holder adopts pure DC operation, which eliminates the visual fatigue caused by the traditional street lamp flicker.

　　 The undesirable glare and light pollution are small. The illumination angle of the LED light source can be planned according to the needs, which can greatly reduce the glare and light pollution, and greatly improve the useful utilization of light.

　　High-power LED lamp holder has a long service life, which is 5-10 times longer than that of traditional lamps. The LED light source uses the most sophisticated white light 1W package at present, and the surface is soldered on a 1.5mm thick aluminum-based circuit board, and then the aluminum substrate is installed on the plane of the radiator to ensure that the heat is quickly transferred to the radiator. In addition, the integrated planning of the radiator and the lamp housing fully guarantees the LED heat dissipation requirements and service life.

　　The operating voltage is low, and the advantages of brightening the LED lamp cap are: ①It will not cause the lampshade to turn black due to high-pressure adsorption of dust like ordinary street lamps, ②Safe and reliable.

　　 Modular integrated planning, which can be combined into products with different power and brightness requirements. Each module is an independent light source and can be exchanged. Partial failures will not affect the normal operation of the entire lamp. It is convenient for disassembly and protection and saves protection costs.

　　 There is no delay in starting, and the normal brightness can be reached when the power is turned on. There is no need to wait, which eliminates the problem of long starting time and repeated starting of traditional street lights.